Hypertrm settings for MAPD TN801B ?

[ngj]

Hi,

After seating the MAPD TN801B board, I'm trying to assign the IP by connecting my laptop to port B of the Cable Assembly.

Does anyone know what the hyperterminal settings are for doing this. I've tried a number of combinations without success.

jon.

 

[4merAvaya]

9600 BPS, 8 bits, no parity. The MAP-D supports the following terminal types: 513, 715, 4410, 4425, vt100, vt220. You can use ASA to administer the MAP-D either through direct connect, dial up, or IP.

Kevin

 

[ngj]

Kevin,

Thanks for the quick reply.
Problem was that a Null Modem serial cable was required.

jon