Hunt group poser?

[Caleb2002]

I am trying to set up a hunt number which will dial approximately 12 analog phones with 2 rings at the 1st and then on to the 2nd etc.

Is there a way of doing this with phones that also individually cover to voicemail.

I have tried using the circ type but this just rings at one extension and doesn't go to the next.

Cheers

 

[scottyjohn]

I think the "redirect on no answer" field on page 2 of the hunt group form might do what you need. Just set the number of rings on that to less than the number of rings on the coverage path of your stations. This should ring the station for say 2 rings and then trip it to the next station in the hunt group. If someone dials the station direct they will let it ring for say 3 rings and then the coverage path will send it to Audix. I think thats the way it should work? John

http://www.eagle-i.co.uk

 

[europe]

what you want to use is hunt-to-station, what you want can not be done with a huntgroup. Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe

 

[Caleb2002]

Well, I think you are right, the only way to get the redirection field is to make the hunt group a skill.

Please clarify a hunt - to - station?

Thanks