Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
<html><body><font color=red>Help me </font><font color=blue>iPECS eMG80</font></body></html>
- Thread starter kckmxv
- Start date
Wishforall
Programmer
Hi kckmxv,
Have you swapped the RJ45s on the eMG80 around that are carrying the lines to see if the fault follows the actual Line or the port on the eMG80.
King Regards,
Wishforall
Have you swapped the RJ45s on the eMG80 around that are carrying the lines to see if the fault follows the actual Line or the port on the eMG80.
King Regards,
Wishforall
- Thread starter
- #3
Wishforall
Programmer
Hi kckmxv,
First of all you need an RJ45 and a RJ45 crimping tool. Have you got these?
Kind regards,
Wishforall
First of all you need an RJ45 and a RJ45 crimping tool. Have you got these?
Kind regards,
Wishforall
- Status
Similar threads
