how to trunk line to server

[kc0hwa]

I trying to learn how to Trunk link.

how do you trunk link to a server!
how do you trunk link like just vlan1-10 or vlan 1,4,7,100

thank for your time

 

[unclerico]

Well, your server NIC needs to be able to support VLAN tags and you need to configure the interface on the switch side as a trunk as well. You define the VLANs on the switch and by default they will all be enabled and forwarding on the trunk. Do you need specific commands to enable this on the switch side?

 

[kc0hwa]

I have had cisco 1,2,3,4 for the CCNA class

they did go throw trunk line to server or all the way

part of a trunk for just serton vlan

they did go throw vlan on a manige switch and irs router so I "think" I have the vlan for switch and router
and set the vlan on a port to a moral client

I know if I have a server and I using like iSAS I problim what the SAN to have it on vlan

if i can vlan trunk to server I then can have fall over link and not have to have a nic for vLAN, san lan printer and if the vIP box and vIP controler is on the server liss nic and just trunk the right vLAN to the server

where or how to look for vLAN NIC card and drive/software for servers

thank

 

[VinceWhirlwind]

interface g1/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk native vlan 99
switchport trunk allowed vlan 1,5,9,21-28