how to swap a PU from other MD system

[wfhy]

All frends:
I don't like load a lot patches to a PU such as ELP6, so I remove it first and then add it with patch (Both ELP6 has same version ). My step is as follows:

1 DUPUI:UNIT=ELP6,LIM=1; ( On other system B)
2 LAPUR:UNIT=ELP6; ( On own system A)
3 LAPUL:UNIT=ELP6; ( On own system A with HDU of B)
4 SFCE;
5 SFPUI:UNIT=ELP6,LIM=1;

Erery is ok, but analog extesion is not ok. why?
PLS help me. I appreciate your help!

 

[rezal]

Wfhy, You have just managed to wipe out ALL data in ELP6,
If You still have an old dump reload from it. If not You
have to start from INL.

To hot swap units used FCPLI.

rezal

 

[patcher]

I think Whfy is just joking or maybe he crazy. Always remember if you do not know what you are doing don't do it.
Ask someone first. Now you had to LALRL your LIM./patcher

 

[mundus]

Hi, next time use the Functional change ( FC ) commands.

 

[wfhy]

rezal and mundus,

Thank you for your respond. I have done well.

Good luck!