How to setup multiple DHCP pools on the 2691

[myng94]

Please help,


I need to setup a 2691 to function as a DHCP server for 3 seperate departments. The goal is to keep the departments' traffic separated while allowing the 2691 to issue DHCP addresses to each department. How should I approach this?
*multiple inferfaces?
*or will vlans and sub-interfaces work for this situation?

I currently have 2 FE interfaces FE0/0 to the internet FE0/1 to the first switch.

Thanks for any help.

 

[AJ1982]

Well, I assume you know howto setup your DHCP pools. So just set up your DHCP Pools.

If an interface asks for an IP, then if one of the DHCP pools deals with it, sorted.

You can acehive mutliple subnets via VLANS, or multiple interfaces, up 2 u.

Ta

AJ

===

Fatman Superstar (Andrew James)

CCNA,
(CCNA Cisco Academy Instructor Trained)