Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to set the designer permissions for a user

Status
Not open for further replies.

NONE2387

Programmer
Joined
Aug 30, 2003
Messages
2
Location
US
I created an user in supervisor and that user do not have permission to import or export and he could not even edit the connection.please explain me in detail.
thanks in advn.
 
You should take a look at the different roles that are available:

Supervisor
Designer
Supervisor - Designer
User Versatile

This will enable default settings which will probably cover what you need.........

(Right-click on user and then 'Set profile to ->'

T. Blom
Information analyst
tbl@shimano-eu.com
 
You can check with that security commands for editing connections
In the Configuration tab, double click on the DESIGNER, you will see the commands and you can enable or disable them
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top