How to set country code as prefix on SIP trunk..IPO500V2

[ACISD]

Dear friends,

Could you please advice How to set country code as prefix on SIP trunk..IPO500V2.
Currently we need to dial country code for local calls which we want to avoid. Call suppose to go out after dialing only number & IPO will attach prefix (country code) with called number & forward on sip trunk.
Please advice.

Thanks in advance.

 

[tlpeter]

Easy done.
Go to the shortcodes and change the shortcode that points to the ARS.

You probably have

0N
Dial
N
50:Main

Change this to

0N
Dial
0031N

In this case 0031 is the country code.


BAZINGA!

I'm not insane, my mother had me tested!

 

[IPGuru]

i would ad this into your ARs short codes

Example in the uk to prefix all calls with the UK country code

SC 0N
TN 0044.
feature dial



Mundus vult decipi decipiatur ergo.

 

[ACISD]

Friends,

I want to dial only number and system shd attach prefix automatically.
ex. country code is 044
if i want to reach 08xxxxxxxxx i will dial only 08xxxxxxxxx from my extension but system shd send 04408xxxxxxxxx on sip trunk.
How this can be possible?

 

[hairlessupportmonkey]

so -

08N
004408N
Dial

use short codes to add or strip numbers.

ACSS - SME
General Geek

 

[tlpeter]

HSM, you have a 0 too much.

It should be 00448 and not 004408


BAZINGA!

I'm not insane, my mother had me tested!

 

[olumide007]

please, i have a similar problem here.i have to dial 2348036786268 before calls can go through but my client wants to dail 08036786268 directly without adding the country code of 234 before the numbers.What do i need to set on the ip office?

 

[tlpeter]

08N
dial
23408N

BAZINGA!

I'm not insane, my mother had me tested!

 

[ACISD]

Thanks it worked!!