how to see connected hosts 1

[turalo]

Hi guys, I'm tryn to find the command wich shows me who is connected to my Pix501, so for example if there are 3 inside hosts wich got IP adresses by dhcp and they are connected now, wich command can I use to see it. cause now I connected new another pc, and it is connected but if I'm outside not on location and want to know which IP did dhcp give to it, and other info.
thanks for any help.

 

[Supergrrover]

To find dhcp info try
show dhcpd (to show the leases)
show dhcpd binding (to show the MAC that the lease was given to.)
The PDM/ASDM also has a bunch of info
Here is a link that shows some screen shots...

http://www.cisco.com/en/US/products...s_configuration_example09186a00806c1cd5.shtml

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[turalo]

Show dhcpd showed only the info about dhcp server,

but the : show dhcpd binding showed the connection


pixfirewall(config)# show dhcpd
dhcpd address 192.168.2.2-192.168.2.10 inside
dhcpd dns 192.168.1.254
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
pixfirewall(config)# show dhcpd binding

IP address Hardware address Lease expiration Type

192.168.2.4 00xx.760d.b145 2583 seconds Automatic
pixfirewall(config)#

that link to cisco's site showed another version of pdm, my pdm does not looks like that, is totaly diferant, there is no options to see devices.


Thankyou, you are realy helpfull, the website visitors have to give you a medal for helping out so many people.

 

[kbing]

On a PIX try the following to show the IP's in use:

show ip local pool ippool

change "ippool" to the name of your dhcpd pool on the pix. It gives a list of IPs and which ones are in use.

 

[Supergrrover]

Did that show the info you wanted? What version of PDM are you using?

Thank you, but everybody is really helpful here. That's why I post here and not so much on other boards.


Brent
Systems Engineer / Consultant
CCNP, CCSP