Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to program a ext # on a Iwatsu DSS

Status
Not open for further replies.
RayBob

RayBob

Vendor
Joined
Nov 24, 2008
Messages
27
Location
US
I am trying to program a ext # on the DSS 121. II can get in to the system with programming laptop but I cannot figure out how to get a ext # on the DSS to show up. Any help out there?
 
Sort by date Sort by votes
I assume you have the Windows programmer? If yes, go to the extension and see what button pattern it has, it should be 131 or above, go to the pattern, choose the buttons (across the top it will have DSS1, DSS2, chose DSS2), make sure you have EXT selected, not CTG in the toolbar. Save. Upload
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
Looking for Iwatsu ADIX programming software
Replies
5
Views
2K
curlycord
curlycord
H
  • Question Question
Alcatel OmniPCX Enterprise - How to monitor/listen an extension programmatically?
Replies
2
Views
286
hauskaki
H
sparepart
  • Locked
  • Question Question
Date of Iwatsu exiting the new CPE market
Replies
2
Views
868
keyset6
keyset6
B
  • Question Question
PBX to offer as an MSP to SMB
Replies
4
Views
256
DoubleDriveLine
DoubleDriveLine
Paulo H.
  • Locked
  • Question Question
Doubt about how the Softhone Avaya send the call data for a new IVR
Replies
1
Views
675
ipohead
ipohead

Part and Inventory Search

Sponsor

Back
Top