HOW TO MAKE AN OUTSIDE CALL WITH AN ACCOUNT CODE ON A NORTEL ATA UNIT 2

[lenndan536652]

HOW DO I GO ABOUT MAKING A CALL FROM AN ANALOGUE PHONE CONNECTED TO A ATA UNIT ON THE NORTEL OX32 SYSTEM WITH AN ACCOUNT CODE ?

 

[curlycord]

Try using Hook flash then the feature code followed by the account code.
It depends what account code (what software) and what normal method you use on a digital set.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[lenndan536652]

1 DO YOU HAVE TO SET THE SWITCH HOOK FLASH TIMING, IF SO TO WHAT SETTINGS?

2 WHAT EXACTLY ARE THE STEPS TO MAKE THE CALL THEN FROM THE ANALOGUE PHONE IF YOU HAVA A SIX DIGIT PASSWORD ?

3 DO YOU DIAL LINE POOL CODE 9 FIRST, OR HOOK FLASH * 68 123456 9 THEN TEL # ?

 

[lenndan536652]

CAN ANYONE PLEASE GIVE ME SOME ASSISTANCE ON QUESTIONS BELOW ?

1 DO YOU HAVE TO SET THE SWITCH HOOK FLASH TIMING, IF SO TO WHAT SETTINGS?

2 WHAT EXACTLY ARE THE STEPS TO MAKE THE CALL THEN FROM THE ANALOGUE PHONE IF YOU HAVA A SIX DIGIT PASSWORD ?

3 DO YOU DIAL LINE POOL CODE 9 FIRST, OR HOOK FLASH * 68 123456 9 THEN TEL # ?

 

[DrB0b]

Please no yelling in the forum, it hurts my eyes. Less caps and you may get more responses.

To question #3, which way have you tried and what messages, denials, or errors occur?

Learning - A never ending quest for knowledge usually attained by being thrown in a situation and told to fix it now.

 

[ironhorse17]

Restriction Override
Link * 68 ¡ <plus an override password> <plus the restricted number>
Allows you to override restrictions imposed on your telephone.

I would think the 9 would go before the restricted number, since dialing 9 followed by link would give you re-order dial tone.

 

[curlycord]

We have a life, therefore we cannot always answer your questions right away, you only need to ask once.

Also I asked you 2 questions:
It depends what account code (what software) and what normal method you use on a digital set.

Maybe you help us help you?.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[lenndan536652]

Thank you all . The normal wey we dial on a digital phone is:

1. select line
2. feature 68 + six digit cos password + tel number to dial.

The software version is a 6.0

First i was wondering what is the switch hook flash timing setting require?

Secondly is dialing procedure flash * 68 + 9 + code + tel number ?

thanks

 

[curlycord]

9 out, flash * 68 code + password + tel number

9 out is grabbing a line, then flash * is using Feature, 68 is your code for LD, password, then line comes back....dial away.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[lenndan536652]

Many thanks this did work. Really appreciate.