Apr 14, 2008 #1 JarekFab Technical User Joined Apr 14, 2008 Messages 2 Location PL Hi, We've just got old type of phone central 'HiCom 150 E OfficePoint', without the manual. We want to join few phones to this unit, but the problem is we don't know which pins and which connectors we got to use. Can someone help us with it?
Hi, We've just got old type of phone central 'HiCom 150 E OfficePoint', without the manual. We want to join few phones to this unit, but the problem is we don't know which pins and which connectors we got to use. Can someone help us with it?
Apr 15, 2008 Thread starter #2 JarekFab Technical User Joined Apr 14, 2008 Messages 2 Location PL And next question, about the ISDN input on S0 bus. Is it Stardart T568B input or crossover? Upvote 0 Downvote
Apr 16, 2008 #3 Bas1234 Technical User Joined Dec 10, 2007 Messages 6,760 Location NL ISDN phones on the STLS card needs to be crossed 4 --- 3 3 --- 4 5 --- 6 6 --- 5 Look on the cards; TLA 2/4/8 = is analog trunk (2-wire) STLS 2/4 = ISDN/S0 trunk (4-wire) STMD 8/16/24 or SLU 4/8 = Digital extension (2-wire) SLA 4/8/16 = Analog extension (2-wire) Greetzzz...Bas ___________________________________________ It works! Now if only I could remember what I did... ___________________________________________ Upvote 0 Downvote
ISDN phones on the STLS card needs to be crossed 4 --- 3 3 --- 4 5 --- 6 6 --- 5 Look on the cards; TLA 2/4/8 = is analog trunk (2-wire) STLS 2/4 = ISDN/S0 trunk (4-wire) STMD 8/16/24 or SLU 4/8 = Digital extension (2-wire) SLA 4/8/16 = Analog extension (2-wire) Greetzzz...Bas ___________________________________________ It works! Now if only I could remember what I did... ___________________________________________