I wanted to see if someone had some ideas on how to get multiple calls on a phone when the lines do not appear on the phone. I have them set up in a hunt group but only one call per phone can be answered. Any ideas? This is a 3.6 system. Thanks.
We have 3 intercom buttons on the phones now but only one call rings the phone at a time. We do have multiple people in the hunt group and they all get the same ONE call. We have teh hunt group set up to broadcast, I will try taking the DND off. Thanks!
You already have 1 hunt group built. You could build 2 more hunt groups and put the same members in each group. Set them all to broadcast and make it queue or overflow short for like 2 or 3 rings from the 1st HG to the 2nd to the 3rd then make the 3rd overflow to the 1st. This allows the lines to ring all idle phones the first 2 rings but then all the phones after the 3rd ring.
If you want each phone to be able to receive calls when they're already on a call, remove the lines from the HG and assign multiple ring only appearances of each line to each phone. If you have 3 intercom keys, then assign three instances of ring only for each line. Make sure you're not forwarding anywhere on busy, otherwise no one will get calls when anyone is on the phone. And turn off DND on busy as suggested.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.