How to disable and enable user 's remote access permission

[xmario2013]

Hi All:

We upgraded to Windows server 2003 domain earlier this year, we are still in mixed mode, still have a few NT BDC lay around, we were able to do most of the task as in the old NT days and more , but as for people 's right to dial in using remote access service, we still have to do it from the NT user manager for domain, we cant find the same option anywhere in the Active Directory and Computer, can someone point us to the right direction to look for it ?

Thanks
XM

 

[tfg13]

First, I would make sure that the RRAS is set up correctly. Here is a MS link:

http://www.microsoft.com/technet/pr...tory/activedirectory/stepbystep/rrascnfg.mspx

And second, look at this article:

http://support.microsoft.com/default.aspx?scid=kb;en-us;323381

 

[xmario2013]

thanks for the info, I forgot to mention our RAS is running on the NT box

before we upgraded to 2003 domain, we would use the user manager in an NT domain controller to allow dial in, but in the Active Directory user and Computers, there is no such option, we have to kept on going back to one of the NT server we still have, which we were told not use anymore

thanks
XM<