Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to delete the clock reference in ld 73 to delete a TRK DLOP?

Status
Not open for further replies.

canopus

Programmer
Joined
Feb 23, 2013
Messages
31
Location
DO
I just need the right procedure to get this done.

I have to recreate two DLOPs but not TRK. I need to create this as PRI

to get it running directly to ASTERISK

Any help?
 
CHange to another DLOP. But I think that I need to delete it before delete a TKR Loop to create another PRI DLOP in the same MDSL card, same slot.

I´m trunking an Asterisk with CS1000
 
Correct you need to remove the CC before you can take the TRK out of the CEQU. Just DIS the CC in LD 60, X the CC out in LD 73, remove the TRK from the CEQU (this is of course after you have removed an DCH or B-Channels associated). The start from the bottom up add DLOP to CEQU, and add the CC in 73.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top