HOW TO CONFIGURE E1 ON THE AVAYA COMMUNICATION MANAGER

[ra1ma2]

hellow friends I meet with the challenge on how to configure E1 on the avaya communication manager?
Always i dealt with different configuration but on this E1 this iz the new to me?

so ca you please give me the procedure by step wise ? if the issueing of signalling may be'''? and anya thing else plz help me?

 

[montyzummer]

depends on your hard ware platform sw revision,

but you need three major components , see the below description of documents to get you the correct stings for your set up they will also walk you through trunk groups and sig groups.

See DS1 Circuit Pack in Avaya Aura™ Communication Manager Screen Reference,
03-602878, for information on administering DS1 service.
See DS1 Trunk Service in Avaya Aura™ Communication Manager Feature Description and
Implementation, 555-245-205, for detailed information on DS1 service.

see this link this is for a t1 , your d channel on the sig group will be port 16 not 24

https://downloads.avaya.com/css/P8/documents/003839394

If all that is beyond you contact one of the many qualified Avaya BP`s or tech`s who would be happy to assist , you see we all invest lots of time and money getting trained on working on these systems so to really give you the step by step guide , is taking work away from our skilled industry, don't get me wrong if you had tried certain steps and needed help that would be a different story but this just seems like a request for free install consultation.

APSS (SME)
ACSS (SME)
ACIS (UC)