Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to configure CMS in an established network

Status
Not open for further replies.
myng94

myng94

Technical User
Sep 3, 2002
38
US
I have a network of about 29 switches that are grouped 3-4 switches per vlan. Each switch currently has an IP address and can be accessed remotely.... these are all 2950s. How would I go about taking advantage of CMS in this scenario?

Thanks

myng
 
Status
Not open for further replies.

Similar threads

jobsp90
  • Locked
  • Question
I have a issue in my office hospital network regarding using IPPBX software.
Replies
2
Views
293
DavetheChef
DavetheChef
Luzbel
  • Locked
  • Question
Connecting HVAC controller to network
Replies
0
Views
425
Luzbel
Luzbel
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
607
madwok
madwok
B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
249
badwolf1686
B
CPM86
  • Locked
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
381
CPM86
CPM86

Part and Inventory Search

Sponsor

Back
Top