How to configre an intercom on analog trunk?

[pepe27]

Hi.

I have an avaya ip office 500 and i want to configure an intercom that when people push the button the telephone rings.

any help?

 

[mforrence]

You may want to ask the question again, providing a bit more detail. I've read it three times and still don't understand the goal.

 

[FlyinScotsman]

do you mean a door station?
or an analog phone hotlined to destination phone?

 

[yankblan]

Basically a doorphone that uses a trunk port; don't know that you can do this straight up on IPO unlike BCM; better use an analog station port.

http://interconnexionsld.ca/

 

[pepe27]

Thanks for asking and sorry for the way that I planted my question:

I mean a door station, the person already installed the device, but he told me that he wants when people push the button on the door outside a phone group that is already created rings and then we can talk whit the people outside, and he also wants to when the people who is talking on the phone can open a door just pushing a button, I dont know if taht is posible.

I hope you can understand a little bit more my ask.

 

[Westi]

you will need a doorcontroller to open the door
the ringdown circuit to call immediately can be done with a shortcode in the user profile

?D
dialExtn
123 (if your group is 123)
line group ID doesn't matter

that will make group 123 ring as soon as the doorphone picks up the extension.

I like the Viking boxes as door controllers and door phones.

Joe W.

FHandw, ACSS (SME), ACIS (SME)

http://convergednetworks.ca

Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.