How to change greeting on a vector? 1

[Ilyam5]

I have extension 121 set up as a vector.

I have trouble changing the greeting on this extention.
It is published as the main service number. How to I access it to change the greeting?

 

[ltw500]

If it is a vector you may need to change the announcement for that vector.

Display the vector and find out which announcement number you are using, then:

disp feature codes and find out your announcement access code. (it is on page one, ours is #05)

you have to be at a phone that is allowed to record announcmenets, to do this the phones cos has to have console permissions. (display cos) to find out which cos has console permissions

From that phone:
Dial the announcement access code (i.e. #05)
Dial the announcement number
press 1 to record
Hang up after recording

 

[Ilyam5]

Thank you very much for your help. It worked.

I"m new to the system, so I'm trying to figure it out as I go.

In the evening the vector points to other extention 884 which is set as
COS AutoAttend

How do I change the message on that?
when i display sub 884 in AUDIX it tells me it's locked and shows no password