How to all but local dialing

[ve3slw]

System is IP500. I need to prevent 4 analog phones from making any long distance calls, including toll free.
I have 3 incoming trunks with dial 9 access.
This is a user setting correct?

 

[amriddle01]

In the user section go to the shortcodes tab, this iswhere you do the barring. for example in the UK all calls that are not local start with a 0 so to bar anything but local I would use the following shortcode

shortcode - 90N
Feature - Busy/Barred
Tel number - 90N

That means if they dial 9 then a 0 they will recieve busy signal but anything else say 9 then 5XXXXXX will go through

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[Westi]

or for North America you substitute the 90N with a 91N just in case you are not in sunny Europe.

Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it

 

[mforrence]

Of course, some carriers in North America (mostly CLEC using PRI) allow you to dial toll calls without leading 1... makes the process more difficult.
Mike

 

[Westi]

forgot about those Mike
I dial anything local in North America except toll free, but I use a SIP line from a cheap provider.

Joe W.

FHandw., ACS

I don't suffer from insanity
I enjoy every moment of it