portmercphone
Vendor
I'm stumped, I'm trying to add an extension. I'm in "Extensions" in the Manager and i've right clicked for "new" how do I tell it what port to connect it to?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to add extension?
- Thread starter portmercphone
- Start date
- Status
dphoneguy24
Technical User
You should already see all of the ports if you are dealing with an analog or digital station port. Adding a new port would only be a IP endpoint.
- Thread starter
- #3
portmercphone
Vendor
Ok, what I need to do then is edit the extension. I had a user using an anolog phone, we just got in another digital avaya 6408 phone so I'd like to add him back to the digital world. When I right click to "edit" i'm not allowed to change anything bu the extension number. I need to change the module and Port
mattKnight
Programmer
Correct!
What you need to do is select the analogue port that has the extension you wish to move (Example 123) and change the extension number to something that is not used (say 666) then select the digital port that you wish to use for the user, edit the extension number associated with this and make it extn 123. Change the old analogue extn (666) to something with your numbering range (I generally use the digital extension I have just editted) You will need save and reboot the system for the changes to be effective
The Analogue and digital ports are physical interfaces to the system, so the only way that you can add them is by added a further expansion unit. Obviously IP extensions are different!
Take Care
Matt
If at first you don't succeed, skydiving is not for you.
- Status