How to activate "Message For You" at a remote site?

[rico699]

We have a Norstar MICS 0x32 rls 6.1 and VM 4.1 at the main site, and a CICS 4x16 rls 1.0 at the remote site. Also there is one (1) OPX circuit from the main site to the remote site. What I would like to do is, when someone leaves a message in a person's mailbox, the mailbox's "off-premise notification" option should be setup to select line 093 (the OPX), select Pager, and send the dialing string "601, pause, link, star 1". This works when I connect an analog (2500 set) directly to the OPX at the main site, go off-hook and dial 601, pause, link *1, the remote site does see "Message For You". The problem is, "how do I get the Voice-mail system to emulate what was done manually. It seems like the VM does not send the LINK SIGNAL.

Any ideas or suggestions on how this may be accomplished?

 

[lugerlover]

kinda think ya need a pri and mcdn to get the message to display an a multisite shared vm.Do a search has been addressed in past