How d'ya add a DID to an existing DS1?

[DJRabin]

Stumped... way out of my league... plodding through help, nothing looks right.

I just want to add a new number to be recogenized and covered to an extension, but not sure where to enter the new number!!

Definity DOPE Dan

-DJ
ACA, Implement IP Office
Convergence+, A+

 

[testLED]

what software you running and what tru group is it?

 

[Zen216]

is the DID already assigned by telco?
if so, you can add the entry in incoming-call-handling..
depending on your software it will be on the trunk group form itself, or on a separate form
if separate it is incoming-call-handling-treatment trunk-group xx

then you can just define the 4 digits you get from telco, delte the number of digits you want to delete, and insert the digits to make it an extension....

display inc-call-handling-trmt trunk-group 2                    Page   1 of  30
                       INCOMING CALL HANDLING TREATMENT
 Service/       Called    Called        Del  Insert           Per Call  Night
 Feature         Len      Number                              CPN/BN    Serv
 public-ntwrk     4   2350              4    6723             bn-only
 public-ntwrk     4   2351              4    5123             bn-only
 public-ntwrk     4   2352              4    5176             bn-only
 public-ntwrk     4   2344              4    5450             bn-only
 public-ntwrk     4   2345              4    5930             bn-only
 public-ntwrk     4   2361              4    5094             bn-only
 public-ntwrk     4   2365              4    6700             bn-only
 public-ntwrk     4   2356              4    6400             bn-only

 

[ezncool]

enter 'cha dial analysis' fill in the necessary information.

ezncool
I have no technical solution to your management problem

 

[DJRabin]

Thanks for the ideas all.

I'm not sure what version, but the trunk group is trunk number 1. They have an existing T1 and are having the lines ported to a new T1 and adding a new number.

I had to bail after testing the new line to make sure it was up and configured but could not test the new DID. I'll have to make the necessary changes next week when we port over to the new carrier.


-DJ
ACA, Implement IP Office
Convergence+, A+