I have my two switches connected via QSIG. Everytihng works ok now including my remote switch seeing my Octel and it is able to leave message to the Octel via my IP trunk. The one thing I can't do right now is transfer calls between the two sites. I did find a workaround but it is not a suitable answer and that is turn on trunk to trunk transfer. Is there a way to select what trunks you want to transfer? I want people to be able to transfer outside calls to my remote site or transfer internal callers to my remote site but I do not want them to transfer to outside callers since this would open the door wide open for toll fraud. Any help is appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do you transfer calls using QSIG on an IP trunk?
- Thread starter mickaloha
- Start date
Similar threads
- Locked
- Question
- Locked
- Question