I know alot of you guys out there have been using the IPTel file server for years, but I've just come across it. Can anybody out there give me some simple instructions on how to configure it for an IPO? I've found the reference manual for it but I'm just not getting it. Maybe I'm not data savvy enough. Any help would be much appreciated!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How Do You Configure MV_IPTel for IPO??? 1
- Thread starter gnmsnyder
- Start date
poke it Andy 
Im slowly losing control of manuals etc. When was that introduced?
ACSS-SME
fo shizzle ma nizzle.
Im slowly losing control of manuals etc. When was that introduced?
ACSS-SME
fo shizzle ma nizzle.
4.2GA
The tech bulletin states that it is increased from 5 to 50 but it is changed in 272.
Now with the 384 extension support it should be 384 simultaneous connections.
Homo sapiens non urinat in ventum
honey, i fried the IP Office !!!
A yard full of tards
The tech bulletin states that it is increased from 5 to 50 but it is changed in 272.
Now with the 384 extension support it should be 384 simultaneous connections.
Homo sapiens non urinat in ventum
honey, i fried the IP Office !!!
A yard full of tards
- Status
Similar threads
