Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I block a number from being dialed?

Status
Not open for further replies.
can't go through full procedure (on my way out)
but I would say to use the call discrimination to bar it out

i.e do a NADAP, and look for the number in the call discrim, section, if I get a chance will go through it tommorow

laters

LB

 
Hi,

Do NACDS:NUM=118,CDCAT=**;

** could be any CAT & is not assigned to any user...
Check NADAP;

Hope it will help..

BR,

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""
 
Hi nickk30
lancbomb and singhbrindisi have right but I thing that if you still have a problem I need
printout of command
NADAP;
And
EXCCP:CAT=ALL;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top