newbietelecom
MIS
I only see Change Class of Service...I'm using telnet to get in the system.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I add a new class of service
- Thread starter newbietelecom
- Start date
- Status
What model of system do you have?
Da-vi'do Juan-is'imo
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.
Da-vi'do Juan-is'imo
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.
The class of service is already set in the system. if it is an aria 250/350 from 1 to 64. you would simply change one of the ones you want and then change the mailbox to that class of service.
Ken Means
Ken Means
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question