Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello, I am trying to connect to

Status
Not open for further replies.

Xavaya4n0w

Technical User
Oct 30, 2013
6
0
0
US
Hello,

I am trying to connect to a Serenade 200/300 externally using a windows 10 laptop with a USRobotics external USB modem.

Will teraterm work when trying to dial in remotely?

How would I set it up?

Do you have to use 555# to connect?

Appreciate any help.

Thanks in advance.
 
Hallo there

You should use a modem that can run Bell-mode.

Then set your modem properties to 1200 bits/seconds / 7 bits / even parity / 1 stopbit.

Connect by: ATDT + voice mail main number + ###5, and you should hear the modem tone.

BR doktor

///doktor
____________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top