How can I tell what my framing and line coding is on my T1?

[jonmohr]

What load should I be in to check what framing and line coding we have on our existing T1? What prompt do I use to check that?

Thank you in advance!

 

[janaya]

ld 22

req: prt
type: cequ


your spans will print out and you should see

b8zs esf or whatever they are.

John

 

[MG2005]

or
ld 60
stat

 

[johnpoole]

ld 60 stat tells you status, ld 22 prt cequ, tells you the framing

 156 24  ESF NO   B8S  FDL  00

loop 156 is 24 channel extended super frame, b8zs (binary 8 bit code superssion)... the provider sets the b8zs, you apply the framing... the other flavor still in use is sf, ami.. getting out dated, mostly t1, don't think pri will talk ami


john poole
bellsouth business
columbia,sc

 

[MG2005]

go into ld 60 do a stat on your oops and tell me if you see the line coding or not

 

[MG2005]

I'll answer for you heres a ld 60 stat:

>ld 60
DTI000
.stat

PRI* TRK LOOP 2 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING

 

[johnpoole]

i stand corrected, my 81 rls must have that, but i don't use it to stat 40 os so pri's.. i try to recogmend the fastest way, not the only.. i had seen that before but was not in the switch, and mis-spoke

john poole
bellsouth business
columbia,sc

 

[MG2005]

hey no big deal just wanted to give the guy all his options, so if he is ever already in lD 60 he doesn't have to back out to go to ld 22 just to see his framing and coding

 

[johnpoole]

much faster if your intrested in one pri/t1

john poole
bellsouth business
columbia,sc

 

[MG2005]

exactly...