How Can I setup a Virtual DMZ with a Cisco 1603 ?

[taylor13]

Hi All,

I need to setup a Virtual DMZ for my Cisco 1603 router to play IP-IP games and have been told this is the only way I can play them, I have tried to adjust the config but nobody has come up with the right combination.

My small network just comprises of a network card connected to the Ethernet0 AUI port on the router then the BRI0 connected to SBus on a NT1 Plus unit then to the ISDN connection in the wall.

I thought it would have been quite easy to put a line in the config for NAT to forward all traffic to a single LAN ip Eg: 192.168.0.1 which would be my machines IP.

Any help would be great.

Cheers,

Jason

 

[taylor13]

These are the ports that the game uses.

TCP: 80, 443, 9999, 6667, 28800 to 29100, 2300 to 2400, 476724.
UDP: 6073, 2300 to 2400.

Cheers,

Jason

 

[taylor13]

Anybody have any idea's ???? regarding my post above.

Cheers

Jason