Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How can I direct RAS to pull IP's from specfic DHCP scope

Status
Not open for further replies.
gjw12

gjw12

IS-IT--Management
Jan 16, 2002
15
US
I have 2 Dhcp servers and a single scope on each server. The secondary scope is not active. I would like to activate it and direct ras to pull IP's for dial in users from that scope only. Hence short TTL for dial in users. Any Ideas?
 
Sort by date Sort by votes
If you activated the server & scope you would find that in normal operations fixed machines would get their IP from the dial-up scope. A simpler method is to use a range of IP assigned on the RAS, These only live as long as the connection and can be a different pool to the main scope and the RAS will handle routing. You will also find that your main scope will probably have assigned some addresses to the RAS server anyway. You will see these if you sort your assigned pool by name and there will be several assigned with the name of your server with the RAS interface.

Chris.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

microsGuy16
  • Locked
  • Question
Can not copy files to Mapped drive
Replies
0
Views
760
microsGuy16
microsGuy16
goombawaho
  • Locked
  • Question
Domain join from wifi connected laptop
Replies
4
Views
1K
goombawaho
goombawaho
DTGMI
  • Locked
  • Question
WIN 10 Pro PC & Adding back to our Network
Replies
0
Views
622
DTGMI
DTGMI
maybeimaleo
  • Locked
  • Question
Can SMTP Be Migrated From 2008 R2 to 2019?
Replies
1
Views
373
maybeimaleo
maybeimaleo
tscstl
  • Locked
  • Question
access to local folder
Replies
1
Views
390
hairlessupportmonkey
hairlessupportmonkey

Part and Inventory Search

Sponsor

Back
Top