Hotline on an analog phone 2

[aben16]

Good day,
I need your help on setting up an analog line to automatically dial a DN.
I found a lot of interesting helpful links in this forum but it did not work for me. I am getting an error message.

Here is what I get:

REQ: chg
TYPE: 500
TN 20 0 0 0
ECHG yes
ITEM ftr hot SCH5537
FTR HOT SCH5537

is there something I am doing wrong?

 

[Johnthephoneguy]

FTR HOT D 5537

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[Johnthephoneguy]

CLS = EHTA Also

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[aben16]

When I type FTR Hot and the spacebar to type d, I get this error message: SCH5537

 

[aben16]

Where do I have to set the Class of service to EHTA?

 

[Johnthephoneguy]

under CLS

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[aben16]

This is what I get:

REQ: chg
TYPE: 500
TN 20 0
ECHG yes
ITEM cls ehta
SCH3088
ITEM

Thank you.

 

[Johnthephoneguy]

print the tnb

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[aben16]

here you are and thank you very much for your help

DES 500
TN 020 0 00 00
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 4662 0 MARP
CPND
NAME SORTIE GUERITE
XPLN 24
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 0
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
SCPW
CLS UNR MNL FBD XFD WTA THFD FND HTD ONS
SCH0099 [A?D CWD SWD MWD RMMD SMWD LPD XHD CCSD TEND LND TVD
REQ: CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
PLEV 02
AACS NO
MLWU_LANG 0
FTR ADL 4 4617
DATE 23 JAN 2007

 

[aben16]

John did you figure out what is wrong?

 

[Johnthephoneguy]

the book says CLS=EHTA and DIP or DTN

I just built a test number and added EHTA and DTn to mine, 81c running 3.0

i had to add it this way

FTR hot d 10 4 6666

I forgot you had to tell it how many digits, ie the 4 to dial 6666

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[aben16]

It does not work.
Each time I hit on the spacebar after "hot" I get the message SCH5537.

 

[Johnthephoneguy]

Here is my test 500 set I made


DES TEST
TN 052 0 00 02
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 8696 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTA MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
PLEV 02
AACS NO
MLWU_LANG 0
FTR HOT D 6666
DATE 23 JAN 2007


JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[Johnthephoneguy]

Did you add the DTN also to the CLS?

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[aben16]

How to do that?

 

[Telco01]

The phone is now set up in the MNL mode to autodial 4617. I believe if you change the cls=DTN you should be able to add the hot dial ftr.

 

[Johnthephoneguy]

do the same easy change you did before, but for item this time put CLS DTN return return return

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[informidicate]

CLS must be MNL to hot dial.

 

[aben16]

I tried all of them (EHTA, MNL, DIP, DTN for CLS) but each time I try to enter this command: FTR HOT D 4 4617, I get an error message before completing it.

When I hit on space bar to enter the "D 4 4617" I get this error: ITEM ftr hot SCH5537

Is there something I have to configure elsewhere?
For the digital phones, the hotline works fine.

 

[Johnthephoneguy]

I would start over, if you have tried everything on an existing set. Try building a test Tn and see if it works then.

JohnThePhoneGuy

"If I can't fix it, it's not broke!