RonnieDio1
Technical User
Is it possible to connect Asterisk and HiPath 4000 via SIP Trunk using SIPQ?
I appreciate the help.
![[bigears]](/data/assets/smilies/bigears.gif "[bigears] [bigears]")
I appreciate the help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hipath 4000 v6 and Asterisk
- Thread starter RonnieDio1
- Start date
- Status
SIPQ Info from Unify
With the introduction of the Unify own VoIP stack, HiPath 4000 V6 and OpenScape 4000 V7 do not longer support CorNet-IP trunking in the future. Exception is the IP trunking for the Xpressions system, which is still supported.
The system operator should convert all existing CorNet-IP trunks in the field to SIPQ as with activation of a new loadware, CorNet-IP trunking is no longer supported. (This new LW will be provided with the A2 software line i.e. meaning pzksti40.A2.xxx-yyy). Systems that do not support SIPQ must be upgraded.
From E04/2014 no expansions using the old loadware are allowed. Only SIPQ may be offered and supplied for IP trunking applications.
With the introduction of the Unify own VoIP stack, HiPath 4000 V6 and OpenScape 4000 V7 do not longer support CorNet-IP trunking in the future. Exception is the IP trunking for the Xpressions system, which is still supported.
The system operator should convert all existing CorNet-IP trunks in the field to SIPQ as with activation of a new loadware, CorNet-IP trunking is no longer supported. (This new LW will be provided with the A2 software line i.e. meaning pzksti40.A2.xxx-yyy). Systems that do not support SIPQ must be upgraded.
From E04/2014 no expansions using the old loadware are allowed. Only SIPQ may be offered and supplied for IP trunking applications.
- Status