Hi, I am reading manuals but no ans

[AlfonsoSF]

Hi, I am reading manuals but no answer is found.

I try to call a module, which performs a common job, from other module or short-code flow and retunt to the same treath.

I mean , for example.

I have a main module. In the action nr2 I call a module "B" which perform an evaluation and set value to a variable. And then I'd like to return to the manin module after the action nr2 . And in the action nr3 use te value.

I need that because the module "B" should be used by other modules.

I dont't see how to use "return to module" in this case.

Any suggestion ??

Thanks in advanced

 

[sizbut]

So in Module B, after the Set Variable action, add a Module Return and label it as NR2.

Then back in you main module that includes Module B, you'll now see a result labelled NR2 that you can link to whatever you need.

Stuck in a never ending cycle of file copying.

 

[AlfonsoSF]

Sorry.

May be I've not understood.

NR2 is a token in the main module. After this I try con call the module "B" from the main module with a "goto" token. So, once the module "B" has perform its job, the return to module brings the flow to nowhere.

 

[IPGuru]

call the module "B" from the main module with a "goto" token

dont do this!

once you have created your moule you can drg it into the call flow you are working on 7 it looks like any other ation with exit points matching then Module return ations that you have put into the module
(sounds more colplicated than i really is)



Do things on the cheap & it will cost you dear

 

[AlfonsoSF]

Great !

I did not know that modules could be dragged to another module.
Really it's easier thant id seems,

Thanks a lot !