Hi gang! I am starting to install

[Phoneman2]

Hi gang!
I am starting to install a Definity Audix system in our Prologic switch in Florida.(I'm in Arizona)I have the hunt group set up and all. I have made 12 extensions and portted 4 of them for the voice mail system. How do I connect the 4 portted extensions to the Audix system? I have a map 5 system in AZ that I run 6 extension to a modem card in the back of the map 5. Our does it just know where to go? So many buttons So little time
Thanks All
Phoneman2

 

[sideshowpete]

Is it an external MAP Audix or an internal Definity Audix ?

 

[Phoneman2]

It's an internal Definity Audix So many buttons So little time
Thanks All
Phoneman2

 

[Phoneman2]

It's an internal Definity Audix. the switch is r8.5 and the vm is new as well So many buttons So little time
Thanks All
Phoneman2

 

[ken07734]

The voice ports are built into the audix. remember to admin them as adx16 ports and the 15th port is for transfer.

 

[Phoneman2]

ADX16 ports..not sure what you mean. Audix 16 ports? So many buttons So little time
Thanks All
Phoneman2