Hi, am I able to create new RCO in cs1k? thanks. 1

[zhulin211]

Hi, my cs1k has RCO0, RCO1, RCO2, am I able to add new RCO? if so, how to do it? thanks.

 

[zstic78]

You can edit one of the current ones in LD 15 under RDR. ) is default (everyone)
CFNA 1-(4)-15 Number of normal ringing cycles for Call Forward No
Answer (CFNA)
CFN0 1-(4)-15 Number of normal ringing cycles for CFNA, Option 0
CFN1 1-(4)-15 Number of normal ringing cycles for CFNA, Option 1
CFN2 1-(4)-15 Number of normal ringing cycles for CFNA, Option 2

 

[Firebird Scrambler]

You can only have 3 options. 0 to 2.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[zhulin211]

thanks your guys, I also have a little concern, if I change RCO2, is there potentially any impact to system? especially for trunk or call routing?

 

[zstic78]

No, You have to select rco 2 in the set programming. It is a set option.

 

[GHTROUT]

If you edit CFN2 and DFN2 , the stations that have RCO 2 will change.

Here is all about RCO:

http://www.ghtrout.com/rdr/rco.html

~~
Gene at GHTROUT.com