Hey: We are using Call Pilot releas

[tonyx]

Hey: We are using Call Pilot release 1.07. I have and Option 61 PBX. I had an employee ask if it would be possible to remotely set their phone to forwarding when they were out of the office because they forget sometimes.

 

[rhack5565]

Look in your software features guide for how to set up remote call forward. This is on the PBX, independent of the Call Pilot.

 

[tonyx]

Ok, so even after I set the actual phone up with remote call forward.....I not sure if this is what I want. I just want to know if there is an access code to enter when you are off-site, so you may activate the Forwarding Feature. In this case just forwarding to voice mail. Not off Prim.

Thanks

 

[tim080772]

The way you can do this, although I DO NOT ADVISE USING IT BECAUSE OF SECURITY RISKS, is to use DISA[1], and then FFC's[2] to remote call forward a persons phone. It is however usually easier to ring a collegue and ask them to do it !

[1] Direct Inward System Access (LD 24)
[2] Flexible Feature Codes (LD 57)


Tim Russell

http://www.russellweb.co.uk/nortel