Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
help
- Thread starter JZJerry
- Start date
norstarpro
Vendor
You will need attach the RAD to a station port.
Depending on the type RAD you have, the programming steps differ.
Older RADS program as:
Feature 9**
PSWD: RADMIN or 723646
Newer RADS program as:
Feature 9**
You will then, set up the System ID, The Rad pswd and the Baud rate.
Let me know if you need further assistance. There are lots of knowlegeable ppl on here.
D. McCall
dave@norstarsupport.com
Depending on the type RAD you have, the programming steps differ.
Older RADS program as:
Feature 9**
PSWD: RADMIN or 723646
Newer RADS program as:
Feature 9**
You will then, set up the System ID, The Rad pswd and the Baud rate.
Let me know if you need further assistance. There are lots of knowlegeable ppl on here.
D. McCall
dave@norstarsupport.com
- Thread starter
- #3
vegasnortel
Vendor
You could check into buying the keycode to enable the built in Internal Remote Access Device (IRAD). The CICS has it but the MICS doesn't. Benefit is that you do not waste a station port and no hardware to buy, but you will need to purchase the keycode. Has all the functionality of the RAD.
Rich Cizmas
Rich Cizmas
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question