help with opt 11 adding second PRI card. 1

[chrislxx]

Hi

I am adding the second PRI card the first is used with a tie line and it is in slot 1. (Below is the CFN)

The new card will be in the second slot (card 2)

Is the card 2 loop 2?

When I try to add DCH 12 for the new PRI

TYPE CFN
ADAN NEW DCH 12
CTYP MSDL
CDNO 2

SCH3722
CDNO

Have I used the wrong loop or have I done something else wrong.

Thanks in advance for any help.

Chris






TYPE CFN

ADAN HIST
SIZE 5000
USER MTC SCH BUG
ADAN TTY 0
TTY_TYPE SDI
CAB 00
CARD 00
PORT 0
DES maintenance
FLOW NO
USER MTC SCH BUG
TTYLOG 0
BANR NO
ADAN TTY 1
TTY_TYPE SDI
CAB 00
CARD 00
PORT 1
DES modem
BPS 2400
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH BUG
TTYLOG 0
BANR NO
ADAN TTY 2
TTY_TYPE SDI
CAB 00
CARD 00
PORT 2
DES cdr
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOW NO
USER CTY
ADAN TTY 8
TTY_TYPE LSL
CAB 00
CARD 10
PORT 0
DES
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOWTYPE MAIL
ADAN AML 9
CARD 10



PAGE 001

PORT 1
DES
BPS 4800
CLOK EXT
IADR 003
RADR 001
T1 10
T2 002
T3 040
N1 128
N2 08
K 7
RXMT 05
CRC 10
ORUR 005
ABOR 005
ENL NO
ADAN DCH 11
CTYP MSDL
CARD 01
PORT 1
DES TOKRCA
USR PRI
DCHL 1
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
NASA NO
IFC SL1
SIDE USR
CNEG 1
RLS ID 24
RCAP ND2 TAT
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7
PARM
LPIB 192
HPIB 32
500B 16
NCR 200
MGCR NULL
CSQI 020
CSQO 020
TUBO NO
CFWS NO
PCML MU
ALRM YES
ERRM ERR BUG AUD
DTRB 100
TMRK 128
FCDR OLD
PCDR NO
TPO NO
TSO NO



PAGE 002

CLID NO
DUR5 NO
MLDN YES
MARP YES
FRPT NEFR
DCUS NULL
MSCL 255
PMSI
MANU PMS1
PMCR 20
PORT NONE
NDIS 20
OCAC NO
MTRO MR
SBA_ADM_INS 001
SBA_USER 010
BCAP SPEECH
NORTEL_BRAND NO
CEQU
MPED 8D
SUPL 000 004 008 012
016 032 036 040
044 048 064 068
072
XCT 000
CONF 029 030 031 062
094 095

DLOP NUM DCH FRM LCMT YALM T1TE TRSH
PRI 001 24 ESF B8S FDL - 00
002 24 ESF B8S FDL 0 00
MISP
OVLY
SID 0
BKGD 044
PBXH 01
TODR 01
DROL 030 034 038 044 135
MULTI_USER OFF
VAS
VSID 09
DLOP
AML 09
SECU NO
INTL 0001
MCNT 9999
CONF DIR
ATRN
CODE 0
SOLR 12
ROLR +45.00
AOLR +45.00
TOLR -45.00
AGCD NO
VOLR NO
HRLR +42.00
HTLR -44.00

 

[phonz1]

yes, slot 2 in an 11 is loop 2, what type of t-1 card, TMDI?

 

[hawks]

SCH3722
Added loops must be of the same type as DCHL.

 

[chrislxx]

the card is a NTAK09 same as slot 1

that is my confusion.

Chris

 

[yyrkroon]

what kind of dch daughterboard do you have on the NTAK09?

 

[chrislxx]

Hi

The daughter board is a NTBK51BA

It is the same as card 1, and card one has the clock controler.

Chris

 

[9201]

Ld 17
REQ: Chg
TYPE: cequ
TDS: <cr>
CONF: <cr>
DLOP: 24 2 esf
MODE: pri
TMDI: no
LCMT: b8s
YALM: fdl
TRSH: 00
<cr> back to REQ:

Then you can define the loop and dch

 

[chrislxx]

would not the command

DLOP 24 2 esf

be loop 24 with 2 channels and esf framing?

is what i have now incorrect?

DLOP NUM DCH FRM LCMT YALM T1TE TRSH
PRI 001 24 ESF B8S FDL - 00
002 24 ESF B8S FDL 0 00
Chris

 

[9201]

24 2 esf = 24=channels loop=2 and framing=esf

Yes you got it.

 

[chrislxx]

That is what I always had but still the error when I try to add the DCH 12 to loop 2. It errors when I tell it card 2 in response to the CDNO prompt.

TYPE CFN
ADAN NEW DCH 12
CTYP MSDL
CDNO 2

SCH3722
CDNO

Perhaps I left a step out.

First I did DLOP

Then I went to ADAN to add the DCH

Am I leaving something out?

Chris

 

[johnpoole]

dlop 2 23 esf, 2 is the loop number 23 is the number of voice channels.. after the loop add the dch then the route then the trunks.. then ld 96 dis msdl x all, enl msdl x fdl, that writes the new dch to the msdl.. then ld 60 enll x. the d will auto establish, you should not need to enl the dch

when you put the trunks in, they have to say d channel sig, instead of asking for a start type.. that is the only dif between t1 and pri adding trunks

john poole
bellsouth business
columbia,sc

 

[yyrkroon]

I see your problem now. You say you have a NTDK09 and daugtherboard, but your CEQU shows you built it as a TMDI...you must have press enter at the TMDI prompt instead of typing NO. Pressing return at the TMDI prompts implies YES (since yes is the default)

DLOP NUM DCH FRM LCMT YALM T1TE TRSH
PRI 001 24 ESF B8S FDL - 00
002 24 ESF B8S FDL 0 00

The 0 in T1TE says its a TMDI, notice how loop 1 shows - in T1TE.

 

[chrislxx]

Thank you

You found my error!

Thanks again

Chris

 

[MagnaRGP]

Good catch krooner. is yyr reference to goose bay?

Star for ya.

 

[yyrkroon]

Thanks for the star.

The name yyrkroon is actually from a fantasty novel "Elric of Melnibone" Yyrkoon (1 r) is a character from the novel. However, you're pretty close with Goose Bay, I'm not that far from there.