Help Restart Problems with Error Codes

[harrisbhj]

Help Please, Very frustrated, Don't know what else to do.
This is a intermittent problem. Only happens when the computer is sitting idle and at random times.

I keep getting stop error code IRQL-NOT-LESS-OR-EQUAL 0X0000000A (0X00000166, 0X00000002, 0X00000000, 0X0804F5BC0) Can anyone decipher this code.

Have tried everything memory swap, sigverif, file checker, uninstalled and run without antivirus (norton 2003) and firewall (zonealarm free). Disabled on board sound, raid config has ata also disabled all HD's and Burners except C drive. Have also disabled all IRQ showing duplicate settings.

Here is a copy of my IRQ and DMA from SiS Sandra with everything enabled.

0 : System timer
3 : COM2
3 : Communications Port (COM2)
4 : COM1
4 : Communications Port (COM1)
6 : Standard floppy disk controller
8 : System CMOS/real time clock
9 : Microsoft ACPI-Compliant System
10 : MPU-401 Compatible MIDI Device
11 : Intel(R) 82801DB/DBM SMBus Controller - 24C3
13 : Numeric data processor
14 : Primary IDE Channel
15 : Secondary IDE Channel
16 : Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
16 : NEC PCI to USB Open Host Controller
16 : RADEON 9800 PRO
17 : Realtek AC'97 Audio
18 : Intel(r) 82801DB/DBM USB Universal Host Controller - 24C7
18 : NEC PCI to USB Open Host Controller
18 : WinXP Promise MBUltra133 (PDC20276) (tm) IDE Controller
19 : Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
20 : Intel(R) PRO/100 VE Network Connection
21 : NEC PCI to USB Enhanced Host Controller B1
23 : Intel PCI to USB Enhanced Host Controller


2 : Standard floppy disk controller
4 : Direct memory access controller

All voltage's, Temps, and Fan speed fine
Running XP PRO with all critical updates
Gigabyte m/b 8PE667 Ultra, 1 Gig Ram 2/512 pc2700
Intel 2.5 Norwood with Intel CPU Fan
Radeon 9800 pro
3 HDs /Using On Board config as ata
Sony DVDRW, Liteon CDRW, Pioneer DVD-ROM
Antec case 450PW 3 Cooling fans
On Board Sound, On Board Lan w/Cable Modem at 1.5MB

 

[dad200uk2000]

Have you tryed starting up with a 3.5" start up disk?
If you haven't got one then go to

http://www.bootdisk.com

and download one.

John

 

[TheRogueX]

I am also getting the IRQL_NOT_LESS_OR_EQUAL (STOP 0x0000000A) error. The codes that it produces are the error codes that identify the cause of the error. Information can be found at

http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_hwpg.asp

I still have the error, however, and have yet to figure out how I might go about fixing it. Occasionally I get a DRIVER_IRQL_NOT_LESS_OR_EQUAL error (STOP 0x000000D1) that points to one of my integrated sound card's driver files. The 0xA error points to my PCI Bus, so I know the errors are somehow related.

My IRQ list is all crazy, with devices on IRQ 16 (Radeon 9800 Pro), IRQ 21 (PCI-USB Controller, USB Host Controller x 3), IRQ 22 (SoundMax Integrated Digital Audio), and IRQ 23 (VIA integrated NIC). I've always understood that there were only 16 IRQs (0-15), and IRQ Steering really confuses the heck out of me. It also drives me crazy that I can't manually configure my IRQs so as to reassign my devices to unused IRQs (of which I have SEVERAL - 3, 4, 5, 7, 10, 11, 12).

Anyone have any ideas?

 

[ski]

harrisbhj,
Is that the full text of the error message?


TheRogueX,
Did you check for an update on your MB's chipset drivers?