Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help adding ports

Status
Not open for further replies.
iggzaplaya

iggzaplaya

MIS
Joined
Sep 29, 2006
Messages
11
Location
US
I need to activate ports that are already physically wired to our switch. What information do I need to perform this? Also, I'm not sure of the commands I should use. Any help is appreciated
 
Sort by date Sort by votes
What type of ports? Stations, trunks?
 
Upvote 0 Downvote
Stations. I have ports where there are no dial tones. I need to activate these.
 
Upvote 0 Downvote
If you need to create a station, try "add station" command, enter the port number (e.g. 1D0808) to the "Port" field of the "STATION" form (on page 1). Also make sure the "Type" matches the Port.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Craft01
  • Locked
  • Question Question
adding ESS and LSP in MGC list
Replies
1
Views
538
JefferP
JefferP
Juan_Moct
  • Locked
  • Question Question
AVAYA TN793CP PORTS ISSUES
Replies
1
Views
409
lopes1211
lopes1211
Z
  • Locked
  • Question Question
Script Help
Replies
2
Views
666
zameerjafri
Z
BIS
  • Locked
  • Question Question
Help me check a file on CMS 20, 21
Replies
4
Views
749
BIS
BIS
Y
  • Locked
  • Question Question
AMS Wav to CM? Help please
Replies
6
Views
1K
YDCTwinkleToes
Y

Part and Inventory Search

Sponsor

Back
Top