Help - Access to PIX is completely gone (timeouts occuring)

[skhoury]

Hello all - I regularly use the ADSM to monitor the PIX and the SSH shell to configure it.

As of yesterday, the ADSM/HTTPS management interfaces stopped working, telnet, ssh and even the console all stopped responding!

If I try to connect to any of them, it just times out!

I am the only one with access to the device and I didn't change any of the configuration parameters.

The odd part is the PIX appears to be working fine - i.e. our VPN tunnels are still up, remote VPNs still work, internet and ACLs are working, etc.

I even power cycled it about an hour ago and it still won't work.

Any thoughts on this and how I can gain access to it again?

Many thanks,

Sam

 

[Supergrrover]

Try this to get access and see whats going on in the config.

http://www.cisco.com/warp/public/110/34.shtml

If all looks ok, open a case with Cisco.


Brent
Systems Engineer / Consultant
CCNP, CCSP