Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello Any suggestion I'm adding

Status
Not open for further replies.

Carlo22

Technical User
Apr 14, 2021
1
SA
Hello
Any suggestion
I'm adding another expansion card mcslc16 to ns500 unit but I'm getting Fault-unacc..


Any suggestion
Thank you

 
Which is the model of the card? (KX-......)

Could you make and show the screenshot of "BPX Configuration-1.Configuration-1.Slot" menu (from PBX's WEB interface)?

------------
Telephone communication like an air: you do not notice it until you spoil it.
 
You can add ONE 16 ext card or TWO 8 ext cards

There are no stupid questions, there are only stupid answers!
 
@kizo is that definetly the case?
I have some NS700's with 2 16 port cards im sure..

Calum M
ACSS
 
@CMUK max legacy extension for NS500-main unit is 34 ( without DXDP) , 2 dig + 16 analog (on main board) + 16 (analog/digital) or 8+8 (analog/digital)
max legacy extension for NS700-main unit is 38 ( without DXDP) , 2 dig + 4 analog (on main board) + 16 (analog/digital) + 16 (analog/digital)

There are no stupid questions, there are only stupid answers!
 
 https://files.engineering.com/getfile.aspx?folder=22956f5c-c83d-4fe7-9882-da927eb9570f&file=NS500_main_unit.jpg
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top