tinkertech
Technical User
Got a news 160GB by WD. I am now formating it in Win2K NTFS, but it says its formating 131 Gigs. Why the loss of space?
If at first you don't succeed, reboot!
If at first you don't succeed, reboot!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HD not full size format!
- Thread starter tinkertech
- Start date
- Status
Read many prior posts about this topic before posting a duplicate question. Older BIOS supports only 130 gb or so, and you will need an upgrade, a new PATA (or SATA) card, or another work-around. Read your WD manual, which will explain your options.
See for definitive information regarding this problem.
In a nutshell, both your BIOS and operating system must support 48-bit LBA.
Does your BIOS see the entire size of the hard drive? If not, then perhaps a BIOS flash is available from the board's manufacturer.
Windows 2000 must have at least SP3 installed, and a registry entry must be changed. See
In a nutshell, both your BIOS and operating system must support 48-bit LBA.
Does your BIOS see the entire size of the hard drive? If not, then perhaps a BIOS flash is available from the board's manufacturer.
Windows 2000 must have at least SP3 installed, and a registry entry must be changed. See
- Status