Having trouble connecting remote VPN session to VPN tunnel session

[texnut]

Hello all - I'm having a hard time setting up some added VPN functionality on our network.

We are using a PIX-506E running 6.3.5.

I've established a tunnel between our office and our data center - the data center is using a PIX-515E w/ 6.3.4.

I've established the remote VPN functionality on our office PIX.

Now, I want to be able to access our production environment through the remote VPN connection ... i.e. connect from my house to the office and still be able to go down the tunnel to get to a production server.

Has anyone ever done this on the 6.3.x OS? I've been playing with the ACLs but I just can't seem to crack it.

Any guidance is much appreciate.

Thanks,

S

 

[brianinms]

That isn't possible on 6.x code. You need 7.0 code to accomplish said task. FYI 7.0 code wont run on a 506 so you would have to upgrade to a 5505.

 

[texnut]

Wonderful - that's what I was afraid of.

I've gotten it to work on the 7.x code before ... was just hoping it might be possible to redirect on 6.x code.

Thanks anyway,

S