Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardware profiles

Status
Not open for further replies.

RoyBarkas

MIS
Joined
Jan 20, 1999
Messages
1
Location
CA
I need to programatically alter which hardware profile will be the default on startup. The reason is that I have some servers that need to normally start up a set of services on startup but not when the previous shutdown was due to a UPS powerfail signal.<br>
<br>
When the server shuts down it can run a command file. I plan to use the command file to run a program that will cause a special hardware profile to become the default. The services in question will be disabled for the special hardware profile.<br>
<br>
I think that all I need to find out is the location in the registry of the default hardware profile. Can anyone point me at it?<br>
<br>
thanks;<br>
<br>
Roy Barkas<br>
Melbourne Australia<br>
rbarkas@usa.net
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top