Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

h.323 signal group

Status
Not open for further replies.
irisngen

irisngen

Programmer
Jun 17, 2005
215
US
can any of you explain this:
Group ID: 201 Active NCA-TSC Count: 0
Group Type: h.323 Active CA-TSC Count: 0
Signaling Type: facility associated signaling
Group State: far-end bypass


why the "Group State" = far-end bypass. the actual far end PBX trunk & signal group are in service.
 
Status
Not open for further replies.

Similar threads

Ru_Grey
  • Locked
  • Question
Ip office 500 trunk h.323 no ring-back tone
Replies
0
Views
237
Ru_Grey
Ru_Grey
fondog2
  • Locked
  • Question
SBC Signal Manipulation script 1
Replies
4
Views
1K
JefferP
JefferP
Stinney
  • Locked
  • Question
Can't set SIP signaling group to not add '+' 1
Replies
2
Views
6K
Instructor of Avaya
Instructor of Avaya
km9v
  • Locked
  • Question
Hunt group question
Replies
3
Views
965
Tanzeem97
Tanzeem97
NewNic
  • Locked
  • Question
h.323 tie line locked up
Replies
0
Views
189
NewNic
NewNic

Part and Inventory Search

Sponsor

Back
Top