Guidelines and Lines 1

[djj55]

Hello, CR XI, I have Guidelines to help with positioning of the objects. The problem is that the lines that I draw around the objects are snaping to the guidelines. I have the zoom at 400% and still can not get the line where I want it.
Size and Position does not keep the input values (example height set to 0.360 CR makes it 0.350). Snap to grid is off and the grid size is set to 0.010.
Thanks for any help.
djj

 

[satinsilhouette]

Try using your up/down/side to side buttons on your keyboard instead of mouse with snap to grid off.

Thanks so much!
satinsilhouette

 

[djj55]

Tried that and the line still jumps to the guideline.
djj

 

[Madawc]

I'm running Crystal 10 under Windows XP. When I hold down the ALT key, lines move freely and don't jump to the grid. Does this help?

Madawc Williams (East Anglia, UK). Using Windows XP & Crystal 10

 

[djj55]

Thanks Madawc,
It works fine in XI. Have a star. Now that you reminded me I remember using that before. The things we forget!
djj