I have 2 routers setup via E1 (Mexico) between 2 plants. From the corporate plant (Plant A), I can ping the remote plant (Plant B) via the point to point with no problems (had to add the WAN route to the tables on the pc's since they now have 2 gateways (1 for Internet & 1 for P-to-p), but once we did that everything worked).
BUT if I try to ping from Plant B to Plant A, I can only get to Plant A's router & no further. I then tried just adding the WAN Route, like I did at Plant B & still no luck. Of course, if I change the default gateway to the E1 gateway, p-to-p traffic works fine on the pc, but no Internet. I tried doing the reversal of the route add's for Plant A, but of course it doesn't work.
Any ideas? Thanks a ton.
BUT if I try to ping from Plant B to Plant A, I can only get to Plant A's router & no further. I then tried just adding the WAN Route, like I did at Plant B & still no luck. Of course, if I change the default gateway to the E1 gateway, p-to-p traffic works fine on the pc, but no Internet. I tried doing the reversal of the route add's for Plant A, but of course it doesn't work.
Any ideas? Thanks a ton.