Going from VMB only to active set with foward to VM

[GL2]

Hello all and a million thanks for all you have already taught me.
Another noop here trying to do a few of the simplier things for my boss (opt 11C system with 85 employees in the company)

We have ~40 users with nothing more than voice mail (ACDNs) but I want to give an existing phone to one of them so he can answer calls at his new desk.
I don't think I need step by step directions, just an outline of the right steps to take and any pitfals to watch out for. I think I can delete the VMB # (ACDN?) and the create the set from scratch, but is this the right way?
Below are the ACD prt from LD 23 for the VMB number [2536] and then the Set printouts for the current desk set that I want to use [DN 2499, TN 2 5].

LD 23 prt ACD:
...
ACDN 2536
...
TYPE ACD
CUST 0
ACDN 2536
MWC NO
DSAC NO
MAXP 1
SDNB NO
BSCW NO
ISAP NO
AACQ NO
RGAI NO
ACAA NO
FRRT
SRRT
NRRT
FROA NO
NCFW 7000
FNCF NO
FORC NO
RTQT 0
SPCP NO
OBTN NO
RAO NO
CWTH 1
NCWL NO
BYTH 0
OVTH 2047
TOFT NONE
HPQ NO
OCN NO
OVDN
IFDN
OVBU LNK LNK LNK LNK
EMRT
MURT
RTPC NO
RAGT 4
DURT 30
RSND 4
FCTH 20
CRQS 100
IVR NO
CWNT NONE
--------------------
>ld 20
MARP NOT ACTIVATED
REQ: prt
TYPE: dnb
CUST 0
DN 2499
...

DN 2499
TYPE SL1
TN 002 0 00 05 KEY 00 H MARP DES TRN 28 SEP 2006
(2008)
-----------------
REQ: prt
TYPE TNB
TN 2 5
...

DES TRN
TN 002 0 00 05
TYPE 2008
CDEN 8D
CUST 0
FDN 7000
TGAR 1
LDN NO
NCOS 2
SGRP 0
RNPG 1
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR PUD MTD FNA HTA ADD HFA
MWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDD
CFTD SFD MRD DDV CNID CDCD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USMD USRD ULAD RTDD PGND OCBD FLXD FTTC DNDY DNO3
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 0
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 2499 0 MARP (This key should become x2536)
(remaining key info deleted because who cares..)

 

[EddieDuece]

Just out ACD 2536, and program that up on key 0 of;
TN 002 0 00 05

No problem eh...this is an easy one!

 

[jamie2]

Out the ACD in LD 23. Then if this is an existing telephone with out ACD, you can do an EASY Change.


What you have typed out will work, if you need to build it from scratch.

 

[Johnthephoneguy]

looks good but you do not have to delete the actual mailbox,VM doesnt care how the call gets to it, via ACDN or just DN, it sees the 4 digits and thats it in most cases.

 

[jamie2]

LD 20

REQ: chg
TYPE: 2008
TN 002 0 00 05
ECHG yes
ITEM key 0 scr 2536 0

 

[GL2]

I get an error with the easy change method.. I will try to our the ACDn first and see if that works. Man the reponse to my post was within seconds! You guys rock.
When I did this:
-----------------
LD 20

REQ: chg
TYPE: 2008
TN 002 0 00 05
ECHG yes
ITEM key 0 scr 2536 0

I got this:

SCH0375
(DN type conflicts with input DN type.)

 

[GL2]

WHoops.. typo.. meant to say "OUT" not "our

 

[johnpoole]

dn conflict is because the acd has to be outed 1st..

ld 23
out
acd
ld 11
chg
2616
key 0 xxxx


john poole
bellsouth business
columbia,sc

 

[EddieDuece]

Always out the ACD first. It'll save you some hair in the longrun!

 

[johnpoole]

it either turns white of turns loose... mine has been white for 20 years... mostly due to nortel

john poole
bellsouth business
columbia,sc

 

[EddieDuece]

If you still have some, your either single, or found a good spouse!

 

[acewarlock]

You need to out the ACDN in LD 23 first, then you can do the ECHG on TN 2 5. Thats the only changes you need to make.

 

[GL2]

Got it! I was just to shy to out something without checking first. Outing can be a problem is some circles.
And as for the hair, its to late either way..
THANKS

 

[EddieDuece]

To be safe, print the DNB/TNB and save, then out it. That way you can put it back if need be.